Ford Content страница 175 Скачать руководство пользователя

Страница: 175 / 336

In heat mode:

•

Rotate the thumbwheel to select
the desired heat level from 1
(MIN) to 5 (MAX).

In cool mode:

•

Rotate the thumbwheel to select
the desired cooling level from 1 (MIN) to 5 (MAX). When setting

selected, the seat(s) will provide vent cooling only (same temperature
as cabin air).

Allow five minutes for the temperature level to stabilize.

Climate controlled seats air filter replacement (if equipped)

The climate controlled seat system includes an air filter that has to be
replaced periodically. Refer to the

Scheduled Maintenance Guide

for

more information.

•

There is a filter located under
both front seats.

•

It can be accessed from the
second row seat. Move the front
seat all the way forward and up
to ease access.

Seating and Safety Restraints

175

Содержание Content

















































































































































































































































































































































Результаты поиска

Содержание Content

Отзывы:

Похожие инструкции для Content

Бренды по названию

Популярные бренды

Ford Content, Руководство пользователя

Результаты поиска

Содержание Content

Отзывы:

Похожие инструкции для Content

Бренды по названию

Популярные бренды