Ford Cargo 2017, Руководство пользователя

Страница: 44 / 240

CONTROLS AND INDICATORS
3
25
1
Introducing Your Vehicle
Rest until now? YES
Scenario: The driver card was withdrawn at
the end of the last working day and inserted
when the new
working day
strated.
1. Confirm with
YES.
2. Select and
confirm End
country for the
last
working day.
3. Select and
confirm Begin
Country for the
current working
day.
Note! Step 2
and 3 will not be
used if
the time between
card withdrawals
and
insertion is less
than nine hours.
4. Confirm if you want a printout or not.
5. Select and confirm YES to confirm the
entries or NO to clear or modify entries.
6. You are now ready to drive.
Rest until now? NO
Scenario: You arrived at
15.23, 23/11 and
withdrew the card. You
performed other work
until 17:00 and rested
until 20.37, 23/11 when
you inserted the card
again.
1. Select and confirm
NO.
2. Confirm Add manual
entries with YES.
3. The following is
displayed. The date
and local time is shown
for the last card
withdrawal.
4. Select and confirm
activity Work.
Adjust and confirm the
date when the
activity ended (23/11).
Default time is set to
insertion time.
Adjust and confirm the time (hour and
minute) to when the activity ended.
5. The following is displayed.
6. Select and confirm activity Rest. In this
example nothing needs to be adjusted.
7. Continue with step 4 in chapter Rest until
now? YES.
Screen Messages
There are 4 types of messages displayed on
the screen
Messages- They contain information about
the operations or reminders for the driver.
Messages can't be stored or printed. Press
Back button to delete a message.
Prewarnings- They are displayed as early
reminders for warnings.Prewarnings are
stored and can be printed.Press OK button
twice to delete a prewarning.
Warnings- Displayed in situations such as
high-speed driving, violation of law or failure of
the tachograph recording.Warnings are stored
and can be printed. Press
OK button twice to
delete a warning.
Failures- They are more important than
warnings and displayed where a failure in
tachograph, sensor or driver board has been
detected. Furthermore, failures are also
displayed where an unauthorized modification
in the equipment has been detected.Failures
are stored and can be printed.Press
OK button
to confirm a failure.
Indicators
Tachograph
42