15
14
15
convenience
intelligent access
*
Note
Your intelligent access transmitter
must be within 3 feet (1 meter) of the vehicle
for intelligent access to function properly.
To lock or unlock the vehicle, touch the inside
of the front exterior door handle. To unlock
and open the liftgate, press the luggage
compartment button. The intelligent access
transmitter also contains a mechanical
key blade, which can be used to unlock the
driver’s door, if necessary.
remote start
To Remote Start Your Vehicle
1.
Press the lock button to lock all the doors.
2.
Press the remote start button twice. The exterior lamps will
flash twice.
Note
If you remote start your vehicle with an integrated
keyhead transmitter, you must switch the ignition on before
driving your vehicle. If you remote start your vehicle with an
intelligent access transmitter, you must press the
STarT/STOP
button on the instrument panel once while applying the brake
pedal before driving your vehicle. For complete information, refer
to the
Remote Control
chapter in your
Owner’s Manual
.
mykey
®
MyKey allows you to program certain driving restrictions in
order to promote good driving habits. You can program things
like: speed restrictions, limited volume levels and safety belt
reminders. For complete information, refer to the
MyKey
chapter
in your
Owner’s Manual
.
110-Volt ac power point
*
The power point is located on the rear of the
center console and can be used to power your
smaller electrical devices that require up to 150
watts. This feature is available to use when your
switch on your ignition and the battery voltage is
above 11 volts. When the indicator light is on, the
power point is working and ready to use.
*if equipped
120-Volt conVenience cord/
cargo storage
Your vehicle is equipped with two under-
floor storage compartments that are located
in front of the rear seats. The compartment
behind the driver seat contains the plug-in
charge cord. The compartment behind the
passenger seat can be used to store items
discretely. Secure the lids so items stay in
place while you drive.
smart power-split
arcHitecture
City Driving:
In stop and go driving and at low speeds,
the electric motor provides the necessary power. The gas
engine kicks in only to recharge the battery or when more
power is needed.
Accelerating:
Step on the accelerator pedal and get all the
responsiveness of a traditional gasoline engine.
Cruising/Highway Driving:
Due to greater power demands
at highway speeds, your vehicle will use the gasoline engine
more frequently than it will while driving at city traffic
speeds. This is normal.
Braking:
For added efficiency, the energy normally created
during braking is recycled to the battery.
Stopped:
To save energy, the gasoline engine will shut off
and the electric motor will stop drawing current.
myford
®
mobile app for
smartpHones
The downloadable MyFord
Mobile app lets you know the
status of your charge and upcoming charge
schedules at any time, from anywhere.
Use the App to
»
See your charge status.
»
Set charging schedules when utility
rates are low with the Value Charging feature.
»
Set your cabin temperature when setting a GO
Time either remotely or through your touchscreen
to precondition your cabin while the vehicle is still
plugged in.
Note
Cabin conditioning effectiveness may be
reduced by extreme outside temperatures or when using
120V charging.
Register your smartphone: visit
www.
MyFordmobile.com
to download your free app.
c-MAX energi
power management
