Fig. 4
12-pin connector on CD Changer
5.
Carefully route audio jack (See
Fig. 4
) to a location on dash or nearby
panel where it will be mounted
(within 6 or 10 ft.)
This location will
vary based on vehicle and customer’s preference
Fig. 4
Audio Jack
6.
Optional:
Drill a ¼” hole in dash, push aux jack threated end through
hole and secure to panel with nut (See
Fig. 5
)
Fig. 5
Warning!
Should you decide to mount jack, make sure panel is no thicker than
1/8
”
to allow the threads to protrude and engage the nut. (If necessary use a
dremel or sander to thin panel). Mounting the jack is not necessary but doing so
makes for a stock appearance and easier to connect and disconnect your audio
device.
