REPLACE ALL REMOVED BEZELS AND
BRACKETS AND REINSTALL
T-HARNESS INSTALLATION
THE SUPPLIED T-HARNESS IS DESIGNED FOR FORD ESCAPE, IF YOUR
T-HARNESS PLUGS DO NOT MATCH THEN YOU WILL NEED TO CUT THE
T-HARNESS AND HARDWIRE THE FOUR WIRES COMING FROM THE CAN
INTERFACE DIRECTLY TO THE VEHICLE’S FACTORY HARNESS.
THESE CONNECTIONS WILL BE MADE AT THE RADIO/HVAC CONTROL
NO DAMAGE CAN OCCUR TO CANBOX DUE TO INCORRECT HI/LOW
CANBUS CONNECTIONS. IF CONNECTED CORRECTLY ONE LED ON THE
CANBOX WILL LIGHT SOLID AND THE OTHER WILL FLASH RAPIDLY.
USE A DIGITAL MULTIMETER TO TEST THE FACTORY WIRES BEFORE
CONNECTION.
RED
POWER
BROWN
GROUND
BLUE
CAN LOW
GREY
CAN HIGH
