PRINCIPLE OF OPERATION
Cruise control lets you maintain a set
speed without keeping your foot on the
accelerator pedal. You can use cruise
control when your vehicle speed is greater
than 20 mph (30 km/h).
USING CRUISE CONTROL
WARNINGS
Do not use cruise control in heavy
traffic, on winding roads or when the
road surface is slippery. This could
result in loss of vehicle control, serious
injury or death.
When you are going downhill, your
vehicle speed may increase above
the set speed. The system will not
apply the brakes. Change down a gear to
assist the system in maintaining the set
speed. Failure to do so could result in loss
of vehicle control, serious injury or death.
Note:
Cruise control will disengage if your
vehicle speed decreases more than 10 mph
(16 km/h) below your set speed while
driving uphill.
E176993
The cruise controls are located on the
steering wheel.
Switching Cruise Control On
Press and release
ON
.
E176994
The indicator will display in the instrument
cluster.
Setting a Speed
1.
Accelerate to the desired speed.
2. Press and release
SET+
.
3. Take your foot off the accelerator
pedal.
Changing the Set Speed
•
Press and hold
SET+
or
SET-
. Release
the control when you reach the desired
speed.
•
Press and release
SET+
or
SET-
. The
set speed will change in approximately
1 mph (2 km/h) increments.
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
Canceling the Set Speed
Press
CNCL
and release, or tap the brake
pedal. The set speed will not be erased.
Resuming the Set Speed
Press
RES
and release.
152
Mustang (CZG) Canada/United States of America, enUSA, Second Printing
Cruise Control