•
Various vehicle speed minders can be
set. Once you select a speed, it will be
shown in the display, followed by an
audible tone when the preselected
vehicle speed is exceeded.
•
Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, the
speed-sensitive or compensated
automatic volume control will be
disabled.
•
Always on setting. When this is
selected, you will not be able to switch
off Advance Trac or traction control,
911 Assist or Emergency Assist, or the
do not disturb feature (if your vehicle
is equipped with these features).
CREATING A MYKEY
Use the information display to create a
MyKey:
1. Insert the key you want to program into
the ignition. If your vehicle is equipped with
a push-button start, place the intelligent
access key fob into the backup slot. The
location of your backup slot is in another
chapter. See
Starting and Stopping the
Engine
(page 145).
2. Switch the ignition on.
3. Access the main menu on the
information display controls, and select
Settings
then
MyKey
by pressing
OK
or
the
>
button.
4. Press
OK
or the
>
button to select
Create MyKey
.
5. When prompted, hold the
OK
button
until you see a message informing you to
label this key as a MyKey. The key will be
restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can also program configurable
settings for the key(s). See
Programming/Changing Configurable
Settings
.
Programming/Changing
Configurable Settings
Use the information display to access your
configurable MyKey settings.
1.
Switch the ignition on using an admin
key or fob.
2. Access the main menu on the
information display controls, and select
Settings
, then
MyKey
by pressing
OK
or
>
button.
3. Use the arrow buttons to get to a
feature.
4. Press
OK
or
>
to make a selection.
Note:
You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
your MyKey settings.
CLEARING ALL MYKEYS
You can clear or change your MyKey
settings using the information display
control on the steering wheel. See
Information Displays
(page 94).
Switch the ignition on using an admin key
or fob.
53
Fusion (CC7) Canada/United States of America, enUSA
MyKey™
Содержание 2015 FUSION
Страница 3: ......
Страница 9: ...6 Fusion CC7 Canada United States of America enUSA ...
Страница 135: ...6 way power seat E176793 132 Fusion CC7 Canada United States of America enUSA Seats ...
Страница 481: ...478 Fusion CC7 Canada United States of America enUSA ...