Ford 2011 Mustang страница 140 Скачать руководство пользователя

Страница: 140 / 348

WARNING:

Never place your arm over the airbag module as a

deploying airbag can result in serious arm fractures or other

injuries.

To properly position yourself away from the airbag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly one or two degrees from the upright position.

WARNING:

Do not put anything on or over the airbag module.

Placing objects on or over the airbag inflation area may cause

those objects to be propelled by the airbag into your face and torso
causing serious injury.

WARNING:

Do not attempt to service, repair, or modify the

airbag supplemental restraint systems or its fuses. Contact your

authorized dealer as soon as possible.

WARNING:

Modifying or adding equipment to the front end of

the vehicle (including frame, bumper, front end body structure

and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.

Seating and Safety Restraints

140

2011 05+ Mustang

(197)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2011 Mustang





























































































































































































































































































































































Результаты поиска

Содержание 2011 Mustang

Отзывы:

Похожие инструкции для 2011 Mustang

Бренды по названию

Популярные бренды

Ford 2011 Mustang, Руководство пользователя

Результаты поиска

Содержание 2011 Mustang

Отзывы:

Похожие инструкции для 2011 Mustang

Бренды по названию

Популярные бренды