NAVIGATION FEATURES (IF EQUIPPED)
Note:
Your navigation SD card MUST be in the SD card slot in order for
you to access the navigation features.
Your navigation system is comprised of two main features, destination
mode and map mode.
To set a destination
, press Dest in the upper right hand corner of the
touchscreen. Then, refer to
Setting a destination
which follows.
To view the navigation map and the vehicle’s current location,
touch the green bar in the upper right hand corner of the touchscreen.
Or, you can also press Dest > Map. Refer to
Map mode
later in this
section.
To order replacement SD navigation cards,
see your authorized
dealer.
Note:
Your SD card slot is spring loaded. To remove the SD card, simply
press the card in and the system will eject the card. Do not attempt to
pull the card to remove it as this could cause damage.
SETTING A DESTINATION
To set a destination:
1. Press ‘Dest’ on the top right corner of the screen.
2. Choose to set a destination using any of the following:
•
My Home
•
Street Address
•
Favorites
•
Intersection
•
Previous Destinations
•
City Center
•
Point of Interest (POI)
•
Map
•
Emergency
3. Follow the highlighted text fields to enter any necessary information.
Note that any order of entry is acceptable. For address destination entry,
the Go! button will appear once all the necessary information has been
entered. Pressing the Go! button will trigger the display of the address
location on the map.
4. Select ‘Set as Dest’ to make this your destination. You can choose to
‘Set as Waypoint’ to have the system route to this point on the way to
your current destination. You can also choose to save the destination as a
Favorite.
Note:
Any Avoid Areas which have been selected are also considered in
route calculation.
Navigation features
56
See
End User License Agreement
at the end of this book
2011 HMI-2 Gen 2
(ln1)
Supplement, 1st Printing
USA
(fus)
Содержание 2011 HMI-2 Gen 2
Страница 1: ...MyFord Touch MyLincoln Touch Supplement ...