Ford 2011 Focus Скачать руководство пользователя страница 65

Страница: 65 / 301

SYNC

威

hands free control

feature (if equipped)

Press

briefly to use the voice

command feature. You will hear a
tone and LISTENING will appear in
the radio display. Press and
hold

to exit voice command.

Press

to activate phone mode or

answer a phone call. Press and
hold

to end call or exit phone

mode.

Press

to scroll through various menus and selections. Press

OK to confirm your selection.

For further information on the SYNC

威

system, refer to the

SYNC

威

supplement.

MOON ROOF (IF EQUIPPED)

You can move the glass panel of the moon roof back to open or tilt up to
ventilate the vehicle.

WARNING:

Do not let children play with the moon roof or leave

children unattended in the vehicle. They may seriously hurt

themselves.

The moon roof is equipped with an automatic, one-touch, express
opening and closing feature. To stop motion at any time during the
one-touch operation, press the control a second time.

Note:

The moon roof will open to the

“comfort”

position first before

opening all the way. The “comfort” position helps to alleviate rumbling
wind noise which may happen in the vehicle with the roof fully opened.

Driver Controls

2011 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2011 Focus














































































































































































































































































































Результаты поиска

Содержание 2011 Focus

Отзывы:

Похожие инструкции для 2011 Focus

Бренды по названию

Популярные бренды

Ford 2011 Focus, Руководство пользователя

Результаты поиска

Содержание 2011 Focus

Отзывы:

Похожие инструкции для 2011 Focus

Бренды по названию

Популярные бренды