
PRINCIPLE OF OPERATION
The system makes it easier to pull away
when the vehicle is on a slope without the
need to use the parking brake.
When the system is active, the vehicle will
remain stationary on the slope for a short
time after you release the brake pedal.
During this time, you have time to move
your foot from the brake to the
accelerator pedal and pull away. The
brakes are released automatically once
the engine has developed sufficient drive
to prevent the vehicle from rolling down
the slope. This is an advantage when
pulling away on a slope, for example from
a car park ramp, traffic lights or when
reversing uphill into a parking space.
WARNING
The system does not replace the
parking brake. When you leave the
vehicle, always apply the parking
brake and select first or reverse gear.
USING HILL START ASSIST
The system is activated automatically
when you stop your vehicle on a slope
greater than 3%. The system operates
with the vehicle facing downhill if reverse
gear is selected and with the vehicle
facing uphill if any forward gear is
selected.
Vehicles with manual
transmission only
The system can be switched on and off
using the information display. See
General information
(page 84).
Activating the system
WARNINGS
You must remain in the vehicle once
you have activated the system.
WARNINGS
At all times you are responsible for
controlling the vehicle, supervising
the system and intervening, if
required.
If a malfunction is detected when
the system is active, the system will
be deactivated and a message will
be shown in the display. See
Information messages
(page 91).
You can activate the system only if the
following conditions have been met:
•
The engine is running.
•
The system is switched on.
•
On vehicles with manual transmission,
the clutch pedal is pressed.
•
No failure mode is present.
To activate the system:
1.
Press the brake pedal to bring the
vehicle to a complete standstill. Keep
the brake pedal depressed.
2. If the sensors detect that the vehicle
is on a slope the system will be
activated automatically.
3. When you remove your foot from the
brake pedal, the vehicle will remain on
the slope without rolling away for a
short time. This hold time will
automatically be extended if you are
in the process of driving off.
4. Drive off in the normal manner. The
brakes will be released automatically.
Deactivating the system
To deactivate the system, perform
one
of the following:
148
Hill start assist
Содержание 2011 C-Max
