MULTI-FUNCTION LEVER
Windshield wiper:
Rotate the end
of the control away from you to
increase the speed of the wipers
(from desired interval to low or high
speed position); rotate towards you
to decrease the speed of the wipers.
Windshield washer:
Press the end
of the stalk:
•
briefly: causes a single swipe of
the wipers without washer fluid.
•
a quick press and hold: the
wipers will swipe several times
with washer fluid.
•
a long press and hold: the wipers
and washer fluid will be activated
for up to ten seconds.
Courtesy wipe feature:
One extra wipe will occur a few seconds after
washing the front window to clear any excess washer fluid remaining on
the windshield.
Note:
Do not operate the washer when the washer reservoir is empty.
This may cause the washer pump to overheat. Check the washer fluid
level frequently. Do not operate the wipers when the windshield is dry.
This may scratch the glass, damage the wiper blades and cause the wiper
motor to burn out. Before operating the wiper on a dry windshield,
always use the windshield washer. In freezing weather, be sure the wiper
blades are not frozen to the windshield before operating the wipers.
Driver Controls
55
2010 Ranger
(ran)
Owners Guide, 1st Printing
USA
(fus)
