Ford 2010 Ranger Скачать руководство пользователя

Страница: 59 / 286

Fold-away mirrors

Pull the side mirrors in carefully
when driving through a narrow
space, like an automatic car wash.

SPEED CONTROL (IF EQUIPPED)

With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.

WARNING:

Do not use the speed control in heavy traffic or on

roads that are winding, slippery or unpaved.

Using speed control

The speed controls are located on the steering wheel. The following
buttons work with speed control:

ON:

Press to turn system on.

OFF:

Press to turn system off.

RES (Resume):

Press to resume a

set speed.

SET+:

Press to set the speed or

increase the set speed.

CST- (Coast):

Press to decrease

the set speed.

Setting speed control

1. Press and release ON.

2. Accelerate to the desired speed.

3. Press and release SET+.

4. Take your foot off the accelerator pedal.

5. The indicator light

on the instrument cluster will turn on.

Driver Controls

2010 Ranger

(ran)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2010 Ranger































































































































































































































































































Результаты поиска

Содержание 2010 Ranger

Отзывы:

Похожие инструкции для 2010 Ranger

Бренды по названию

Популярные бренды

Ford 2010 Ranger, Руководство пользователя

Результаты поиска

Содержание 2010 Ranger

Отзывы:

Похожие инструкции для 2010 Ranger

Бренды по названию

Популярные бренды