Ford 2010 E-150 страница 34 Скачать руководство пользователя

Страница: 34 / 324

RBDS:

Available only in FM mode. This feature allows you to search

RBDS-equipped stations for a certain category of music format:
CLASSIC, COUNTRY, INFORM, JAZZ/RB, ROCK, etc.

To activate,

press MENU repeatedly until RBDS (ON/OFF) appears in

the display. Use

to toggle RBDS ON/OFF. When RBDS is OFF,

you will not be able to search for RBDS equipped stations or view the
station name or type.

To search for specific RBDS music categories:

When the desired

category appears in the display, press

to find the desired type,

then press and release

SEEK, SEEK

or press and hold SCAN to

begin the search.

To view the station name or type:

When the desired category appears

in the display, press TEXT/SCAN to toggle between displaying the station
type (COUNTRY, ROCK, etc.) or the station name (WYCD, WXYZ, etc.).

BASS:

Press MENU to reach the bass setting. Use

to adjust.

TREB (Treble):

Press MENU to reach the treble setting. Use

adjust.

BAL (Balance):

Press MENU to reach the balance setting. Use

to adjust the audio between the left (L) and right (R) speakers. Press
OK to close and return to the main menu.

FADE (If equipped with four speaker audio system):

Press MENU

to reach the fade setting. Use

to adjust the audio between the

back (B) and front (F) speakers.

SPEED VOL (Speed sensitive volume, if equipped):

Press MENU to

reach the SPEEDVOL setting. Radio volume automatically gets louder
with increasing vehicle speed to compensate for road and wind noise.
Use

to adjust.

The default setting is

off;

increasing your vehicle speed will not change

the volume level.

Adjust

1–7:

Increasing this setting from 1 (lowest setting) to 7 (highest

setting) allows the radio volume to automatically change slightly with
vehicle speed to compensate for road and wind noise.

Recommended level is

1–3;

SPEED OFF turns the feature off and level 7

is the maximum setting.

Entertainment Systems

2010 Econoline

(eco)

Owners Guide, 1st Printing
USA

(fus)

Содержание 2010 E-150





































































































































































































































































































































Результаты поиска

Содержание 2010 E-150

Отзывы:

Похожие инструкции для 2010 E-150

Бренды по названию

Популярные бренды

Ford 2010 E-150, Руководство пользователя

Результаты поиска

Содержание 2010 E-150

Отзывы:

Похожие инструкции для 2010 E-150

Бренды по названию

Популярные бренды