Ford 2009 Focus страница 39 Скачать руководство пользователя | Manualshive

Страница: 39 / 276

background image

9.

Temperature control:

Controls the temperature of the airflow in the

vehicle.

10.

Passenger heated seat control (if equipped):

Press to

activate/deactivate the passenger heated seat. See

Heated seats

in the

Seating and Safety Restraints

chapter.

11.

Recirculated air:

Press to activate/deactivate air recirculation

in the vehicle. Recirculated air may reduce the amount of time needed to
cool down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculated air engages
automatically when MAX A/C is selected or can be engaged manually in
any airflow mode except

(defrost). When the ignition switch is

turned off and back on, the climate system will return to the recirculated
air mode only if the A/C button LED is illuminated and the air
distribution selection is either

(panel) or

(panel/floor).

12.

MAX A/C:

Distributes recirculated air through the instrument panel

vents to cool the vehicle. This re-cooling of the interior air is more
economical and efficient. Recirculated air may also help reduce
undesirable odors from entering the vehicle. Press the MAX A/C button
again for normal A/C operation.

13.

A/C:

Press to activate/deactivate air conditioning. Use with

recirculated air to improve cooling performance and efficiency. A/C
engages automatically in MAX A/C,

(defrost) and

(floor/defrost).

14.

Driver heated seat control (if equipped):

Press to

activate/deactivate the driver heated seat. See

Heated seats

in the

Seating and Safety Restraints

chapter.

Operating tips

•

To reduce fog build up on the windshield during humid weather,
select

(defrost) or

(floor/defrost).

•

To reduce humidity build up inside the vehicle, do not drive with the
system off or with

(recirculated air) engaged and A/C off.

•

Do not put objects under the front seats that will interfere with the
airflow to the back seats.

•

Remove any snow, ice or leaves from the air intake area at the base of
the windshield.

•

To improve the time to reach comfort in hot weather, drive with the
windows slightly open for 2-3 minutes after start up or until the
vehicle has been “aired out.”

2009 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Climate Controls

39

«
...
37
38
39
40
41
...
»

Содержание 2009 Focus





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2009 Focus

Бренд: PAC Страницы: 15

SP200 - QUICKSTART GUIDE 1

Бренд: Jabra Страницы: 2

BT150 - Headset - Over-the-ear

Бренд: Jabra Страницы: 2

Бренд: Q'STRAINT Страницы: 10

Бренд: Porsche Страницы: 144

Бренд: Conrad Страницы: 26

2003 Thunderbird

Бренд: Ford Страницы: 200

Бренд: Mercedes-Benz Страницы: 30

FIX&GO automatic

Бренд: Alfa Romeo Страницы: 40

Бренд: Spiral Audio Страницы: 2

Бренд: Volvo Страницы: 211

A-18 TRAILER ABS

Бренд: BENDIX Страницы: 40

Бренд: Toyota Страницы: 56

Бренд: Thule Страницы: 8

LED Dominator TAM83S2

Бренд: Whelen Engineering Company Страницы: 2

Бренд: Menabo Страницы: 8

Бренд: Westin Страницы: 3

Бренд: Black Horse Off Road Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды