Ford 2009 Focus Скачать руководство пользователя | Manualshive

Страница: 158 / 276

background image

SNOW TIRES AND CHAINS

WARNING:

Snow tires must be the same size, load index, speed

rating as those originally provided by Ford. Use of any tire or

wheel not recommended by Ford can affect the safety and
performance of your vehicle, which could result in an increased risk of
loss of vehicle control, vehicle rollover, personal injury and death.
Additionally, the use of non-recommended tires and wheels could
cause steering, suspension, axle or transfer case/power transfer unit
failure.

The original equipment tires on your vehicle have an all-weather tread
design to provide traction, handling and braking performance in
year-round driving. You may install snow tires for improved traction
when driving in areas with sustained periods of snow or icy driving
conditions.

If you choose to install snow tires on your vehicle, they must be the
same size, construction, and load range as the original tires listed on the
tire placard, and they must be installed on all four wheels. Mixing tires of
different size or construction on your vehicle can adversely affect your
vehicle’s handling and braking, and may lead to loss of vehicle control.

WARNING:

Do not use snow chains or cables on this vehicle as

they may cause damage to your vehicle which may lead to loss

of vehicle control.

VEHICLE LOADING – WITH AND WITHOUT A TRAILER

This section will guide you in the proper loading of your vehicle and/or
trailer, to keep your loaded vehicle weight within its design rating
capability, with or without a trailer. Properly loading your vehicle will
provide maximum return of vehicle design performance. Before loading
your vehicle, familiarize yourself with the following terms for determining
your vehicle’s weight ratings, with or without a trailer, from the vehicle’s
Safety Compliance Certification Label:

Base Curb Weight

– is the weight of the vehicle including a full tank of

fuel and all standard equipment. It does not include passengers, cargo, or
optional equipment.

2009 Focus

(foc)

Owners Guide, 1st Printing
USA

(fus)

Tires, Wheels and Loading

158

«
...
156
157
158
159
160
...
»

Содержание 2009 Focus





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2009 Focus

Бренд: Axxess Страницы: 8

Бренд: SeaSucker Страницы: 9

1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28

Бренд: Havis-Shields Страницы: 3

Бренд: Pyle Страницы: 4

Бренд: Alphasonik Страницы: 8

Бренд: MBRP Страницы: 5

Бренд: Jaeger Страницы: 11

Бренд: ATS Страницы: 12

Quantum Wash'n'Wipe N30205

Бренд: National Cycle Страницы: 12

2014 All vehicles

Бренд: Jeep Страницы: 44

Бренд: BMW Страницы: 177

Бренд: Volvo Страницы: 3

Nemesis Ultra FNU200

Бренд: Purpleline Страницы: 4

Quad Gear 18-029-010401-00-SC

Бренд: Classic Accessories Страницы: 4

Бренд: Telwin Страницы: 32

Бренд: MeiTrack Страницы: 15

Бренд: Prorack Страницы: 15

Бренд: Toyota Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды