Ford 2008 F-150 страница 39 Скачать руководство пользователя

Страница: 39 / 400

BASS:

Press MENU to reach the bass setting.

Use

SEEK, SEEK

to adjust.

TREB (Treble):

Press MENU to reach the treble setting.

Use

SEEK, SEEK

to adjust.

BAL (Balance):

Press MENU to reach the balance setting.

Use

SEEK, SEEK

to adjust the audio between the back

(B) and front (F) speakers.

FADE:

Press MENU to reach the fade setting.

Use

SEEK, SEEK

to adjust the audio between the left

(L) and right (R) speakers.

ALL SEATS (Occupancy mode)

(Available on Audiophile radios only):

Press MENU repeatedly to access. Press

SEEK

optimize sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

SPEEDVOL (Speed sensitive volume, if equipped):

Press MENU to

reach the SPEEDVOL setting. Radio volume automatically gets louder
with increasing vehicle speed to compensate for road and wind noise.

Use

SEEK, SEEK

to adjust.

The default setting is

off;

increasing your vehicle speed will not change

the volume level.

Adjust

1–7:

Increasing this setting from 1 (lowest setting) to 7 (highest

setting) allows the radio volume to automatically change slightly with
vehicle speed to compensate for road and wind noise.

Recommended level is

1–3;

SPEED OFF turns the feature off and level 7

is the maximum setting.

Track/Folder Mode:

Available only on MP3 discs in CD mode. In Track

Mode, pressing

SEEK

will scroll through all tracks on the disc.

In Folder mode, pressing

SEEK

will scroll only through tracks

within the selected folder.
Press

FOLDER, FOLDER

to access the previous/next folder (if

available).

COMPRESS (Compression):

Available only in CD/MP3 mode. Press

MENU until COMPRESS ON/OFF appears in the display.

2008 F-150

(f12)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Содержание 2008 F-150

















































































































































































































































































































































































































Результаты поиска

Содержание 2008 F-150

Отзывы:

Похожие инструкции для 2008 F-150

Бренды по названию

Популярные бренды

Ford 2008 F-150, Руководство пользователя

Результаты поиска

Содержание 2008 F-150

Отзывы:

Похожие инструкции для 2008 F-150

Бренды по названию

Популярные бренды