Trip odometer:
Registers the miles
(kilometers) of individual journeys.
Press the SELECT/RESET control
once to switch from the odometer to the
trip odometer. Press the control again to select Trip A and Trip B features. To
reset the trip, press and hold the control again until the trip reading is 0.0 miles.
Tachometer:
Indicates the engine
speed in revolutions per minute.
Driving with your tachometer
pointer continuously at the top of
the scale may damage the engine.
Battery voltage gauge:
Indicates
the battery voltage when the ignition
is in the ON position. If the pointer
moves and stays outside the normal
operating range, have the vehicle’s
electrical system checked by your
authorized dealer as soon as possible.
Engine oil pressure gauge:
Indicates engine oil pressure. The
needle should stay in the normal
operating range (between “L” and
“H”). If the needle falls below the
normal range, stop the vehicle, turn
off the engine and check the engine
oil level. Add oil if needed. If the oil level is correct, have your vehicle
checked at your authorized dealer.
Fuel gauge:
Indicates approximately
how much fuel is left in the fuel tank
(when the ignition is in the ON
position). The fuel gauge may vary
slightly when the vehicle is in motion
or on a grade.
The FUEL icon and arrow indicates
which side of the vehicle the fuel filler door is located.
Refer to
Filling the tank
in the
Maintenance and Specifications
chapter for more information.
H
L
2006 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA
(fus)
Instrument Cluster
17
