MANUAL HEATING AND AIR CONDITIONING SYSTEM
(IF EQUIPPED)
1.
Temperature selection:
Controls the temperature of the
airflow in the vehicle.
2.
Air flow selections:
Controls
the direction of the airflow in the
vehicle. See the following for a brief
description on each control.
MAX A/C:
Uses recirculated air
through the instrument panel registers to cool the vehicle. This mode is
more noisy than A/C, but is more economical and efficient and may help
prevent undesirable odors from entering the vehicle.
:
Distributes outside air through the instrument panel vents.
:
Distributes outside air through the instrument panel vents and
floor ducts.
O (OFF):
Outside air is shut out and the fan will not operate.
:
Distributes outside air through the floor vents.
:
Distributes outside air through the windshield defroster vents and
floor vents.
:
Distributes outside air through the windshield defroster vents.
3.
A/C:
Used to manually enable or disable the operation of the air
conditioning in all modes except Floor & Defrost, Defrost and MAX A/C.
4.
: Clears ice and fog from the rear windshield.
5.
Fan speed adjustment:
Controls the volume of air circulated in the
vehicle.
Since the air conditioner removes moisture from the air, it is considered
normal operation if water drips on the ground under the air conditioner
drain.
The A/C compressor will only function if the outside temperature is
above approximately 2°C (35°F).
OPERATING TIPS
•
To reduce fog build up on the windshield during humid weather, place
the air flow selector in the
position.
•
To reduce humidity build up inside the vehicle: do not drive with the
air flow selector in the OFF or (in cold weather) MAX A/C position.
REVIEW COPY
2005 Expedition
(exd)
, Owners Guide (post-2002-fmt)
(own2002)
,
Market:
USA_English
(fus)
Climate Controls
Climate Controls
92
Содержание 2005 Expedition
Страница 368: ...368 ...
