Ford 2005 Excursion, Руководство пользователя

Страница: 92 / 280

3. Press and hold the 1
•
2 for two seconds. This must be done within
five seconds of completing Step 2.
Your personal code is now erased and only the factory set 5–digit code
will work.
Anti-scan feature
If an incorrect code has been entered 7 times (35 consecutive button
presses), the keypad will go into an anti-scan mode. This mode disables
the keypad for one minute and the keypad lamp will flash during this
time.
The anti-scan feature will turn off after:
•
one minute of keypad inactivity.
•
pressing the control on the remote entry transmitter.
•
the ignition is turned to the 4 (ON) position.
Unlocking and locking the doors using keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate after entering a valid keypad
entry code.
To unlock all doors, press the 3
•
4 control within five seconds.
To lock all doors, press the 7
•
8 and the 9
•
0 at the same time. You
do not need to enter the keypad code first. Note: The interior lamps
will turn off.
Autolock (if equipped)
This feature automatically locks all vehicle doors when the following
conditions are met:
•
the ignition key is in the 4 (ON) position,
•
all the doors are closed,
•
the brake is pressed before reaching 5 mph (8 km/h), and
•
the vehicle is traveling more than 5 mph (8 km/h).
Relock
The autolock feature repeats when the following conditions are met:
•
the vehicle’s speed is less than 5 mph (8 km/h),
•
any door is opened then closed while the ignition is in the 4 (ON)
position,
2005 Excursion (hdw)
Owners Guide (post-2002-fmt)
USA
(fus)
Locks and Security
92