Compass
The compass display is contained in the overhead console. The vehicle
heading is displayed as one of N, NE, E, SE, S, SW, W and NW.
The compass reading may be affected when you drive near large
buildings, bridges, power lines and powerful broadcast antenna. Magnetic
or metallic objects placed in or on the vehicle may also affect compass
accuracy. Adjustments may need to be made to the zone and calibration
of the compass.
Compass zone adjustment
1. Determine which magnetic zone
you are in by referring to the zone
map.
2. Turn the ignition to the ON
position.
3. Press and hold the SELECT
control until VAR appears in the
display, then release. The display
should show the current zone
number.
4. Press the SELECT control until
the desired zone number appears.
The display will flash and then
return to normal operation. The zone is now updated.
Compass calibration adjustment
Perform this adjustment in an open
area free from steel structures and
high voltage lines:
•
Press and hold the SELECT
control until CAL appears in the
display (approximately eight
seconds) and release.
1
2
3
4
5
6
7 8 9 1011
12
13
14
15
9 VAR
CAL
2003 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA English
(fus)
Driver Controls
66
Содержание 2003 Econoline
Страница 219: ...3 2 1 4 5 2003 Econoline eco Owners Guide post 2002 fmt USA English fus Maintenance and Specifications 219 ...
Страница 230: ...230 ...
Страница 231: ...231 ...
Страница 232: ...232 ...