When the key is in the ignition OFF position, the automatic
transmission shift lever can be moved from the P (Park) position
without the brake pedal depressed. To avoid unwanted vehicle
movement, always set the parking brake.
3. Start the vehicle.
If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brakelamps are not
operating properly. Refer to
Fuses and relays
in the
Roadside
emergencies
chapter.
Do not drive your vehicle until you verify that the brakelamps
are working.
Always set the parking brake fully and make sure the gearshift is
latched in P (Park). Turn the ignition to the LOCK position and
remove the key whenever you leave your vehicle.
If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.
See your dealer or a qualified service technician.
Understanding the gearshift positions of the 4–speed automatic
transmission
P (Park)
This position locks the transmission and prevents the rear wheels from
turning.
To put your vehicle in gear:
•
Start the engine
•
Depress the brake pedal
•
Move the gearshift lever into the desired gear
2003 Econoline
(eco)
Owners Guide (post-2002-fmt)
USA English
(fus)
Driving
120
Содержание 2003 Econoline
Страница 219: ...3 2 1 4 5 2003 Econoline eco Owners Guide post 2002 fmt USA English fus Maintenance and Specifications 219 ...
Страница 230: ...230 ...
Страница 231: ...231 ...
Страница 232: ...232 ...