Fluid
Ford Part
Name
Application
Capacity
Transmission
3
Motorcraft
MERCON
t
V
ATF
Automatic
(4R70W)
13.1L
(13.9 quarts)
Motorcraft
MERCON
t
ATF
Automatic
(E4OD)
15.0L
(15.9 quarts)
Windshield
washer fluid
Ultra-Clear
Windshield
Washer
Concentrate
All
Fill to line on
reservoir
If your vehicle’s rear axle is filled with a synthetic rear axle lubricant it is
considered lubricated for life. These lubricants do not need to be
checked or changed unless a leak is suspected, service is required or the
axle assembly has been submerged in water. The axle lubricant should
be changed any time the rear axle has been submerged in water.
1
Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole.
Add 118 ml (4 oz.) of additive friction modifier C8AZ-19B546-A, Ford
specification EST-M2C118–A, for complete refill of 8.8 inch and 9.75 inch
Traction-Lok axles.
2
Fill Dana rear axles to 6 mm to 19 mm (1/4 inch to 3/4 inch) below
bottom of fill hole.
3
Always use dipstick to determine exact fluid requirement.
4
Ford conventional and Traction-Lok axles, Dana 80 axle (E-Super
Duty) and Dana axles on E-350 vans/wagons with 4.10:1 ratio require
Motorcraft SAE 75W140 Synthetic Rear Axle Lubricant (part number
F1TZ-19580–B). Add 118 ml (4 oz.) of friction modifier C8AZ-19B546-A,
Ford specification EST-M2C118–A. Dana conventional and limited-slip
axles require Motorcraft SAE 80W90 Premium Rear Axle Lubricant. Add
177ml (6 oz.) of additive friction modifier C8AZ-19B546-A, Ford
specification EST-M2C118–A.
Capacities and specifications
131