Ford 1996 E150 Скачать руководство пользователя

Страница: 279 / 388

281

[SV02600( ALL)03/95]

Working with the engine off:

[SV02650( E M)03/95]

Set the parking brake fully and make sure
that the gearshift is securely latched in P
(Park).

[SV02700( ALL)06/95]

Remove the key from the ignition after you
turn the engine off.

[SV02725( ALL)06/95]

Block the wheels. This will prevent your
vehicle from moving unexpectedly.

[SV02750( ALL)03/95]

Working with the engine on:

[SV02785( E M)03/95]

Set the parking brake fully and make sure
that the gearshift is securely latched in P
(Park).

[SV02795( E M)03/95]

Block the wheels. This will prevent your
vehicle from moving unexpectedly.

[SV02900( ALL)02/95]

WARNING

Do not start your engine with the air
cleaner removed and do not remove it
while the engine is running.

[SV02950(BEF )03/95]

Opening the Hood

[SV03025( E )05/89]

Pull the hood release handle, located on the
left kick panel near the parking brake release
handle.

[SV03050(BEF )12/91]

While applying downward pressure on the
hood, push the hood latch handle located
behind the grille near the center front of the
vehicle to the left.

[SV03100( E )08/94]

Disconnect the hood support from the
retaining clip on the radiator support and
place it into the slot marked PROP in the
underside of the hood.

File:14ltsve.ex

Update:Wed Apr 17 08:40:13 1996

Содержание 1996 E150





































































































































































































































































































































































































Результаты поиска

Содержание 1996 E150

Отзывы:

Похожие инструкции для 1996 E150

Бренды по названию

Популярные бренды

Ford 1996 E150, Руководство пользователя

Результаты поиска

Содержание 1996 E150

Отзывы:

Похожие инструкции для 1996 E150

Бренды по названию

Популярные бренды