Techline 1-800-367-378
Page 4 of 4
IS M-12655-F 032720
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS © Ford Motor Company 2020
Ford Factory Shop Manual purchase options
www.motorcraftservice.com
M-12655-F
PROCAL4 INSTRUCTIONS
Datalogging
4.
Gauges
a.
Allows user to monitor real-time data supported by the tool.
b.
Some examples of monitorable data
i.
Air fuel ratio
ii.
Spark timing
iii.
RPM
iv.
Temperature
c.
To utilize; select gauges, then select a channel, then select the desired function to be
monitored
5.
Datalog
a.
Allows recording of signals received in the “Gauges” screen. To utilize; first select a
datalog file and pick a log file to record to. Once complete, select the “start recording”
button. The selected logfile number will show up in red in the upper right corner of the
screen. When complete, select the “stop recording” button. The logfile can be retrieved
by plugging the tool into a computer, opening the ProCal 4 software, and navigating to
the datalog tab. Data is stored in a .csv format.
***NOTE*** If vehicle is equipped with an automatic transmission, several miles and/or days
of driving may be required for all adaptive learning to complete. Do not be alarmed at shift
quality immediately after installing of calibration. It is recommended to do light throttle
driving until shift quality has stabilized.
