Techline 1-800-367-378
Page 1 of 4
IS M-12655-F 032720
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS © Ford Motor Company 2020
Ford Factory Shop Manual purchase options
www.motorcraftservice.com
M-12655-F
PROCAL4 INSTRUCTIONS
PRIOR TO INSTALLATION READ THESE INSTRUCTION COMPETELY
For questions, Call the FORD PERFORMANCE Techline 1-800-367-3788
Please visit
https://www.performanceparts.ford.com
for warranty information
***NOTE*** The ProCal 4 tool is shipped without a calibration; the end user must register
with Ford Performance Parts (FPP) and download the ProCal 4 software and follow the
instructions below. The software provided to install performance calibrations to the ProCal 4
tool is compatible only with Windows 7 or above and can be found at
www.performanceparts.ford.com/downloads.
Installing FPP ProCal 4 software on PC
1.
Create account at
www.performanceparts.ford.com/register
2.
Upon account creation, log into account and navigate to “Download” page to download
ProCal 4 software
3.
Once software is downloaded, install software on PC
Preparing ProCal 4 tool for use
1.
After software install is complete, connect ProCal 4 device to PC via supplied USB cable
2.
Program should connect automatically with programmer displaying serial number,
firmware version number, and automatically check for updates. Follow all on screen
prompts and fully complete all updates for ProCal software and ProCal tool before
connecting to vehicle
Before connecting the ProCal 4 tool to the vehicle
1.
Turn off all accessories & unplug any electronic devices from any power or USB ports
(A/C, radio, lights, etc.)
2.
Ensure vehicle battery is sufficiently charged (12 volts or more)
***NOTE*** IT IS HIGHLY RECCOMENDED TO CONNECT VEHICLE TO A BATTERY
CHARGER/TENDER TO ENSURE ADEQUATE BATTERY VOLTAGE DURING
CALIBRATION PROCESS
