Force USA F-HPR, Руководство пользователя

Страница: 6 / 17

6
ASSEMBLY DIAGRAM 3 USE A PARTNER TO HELP IN THIS STEP
REMEMBER: Only hand tighten all nuts and bolts until whole F-HPR is assembled
1. Attach a MAIN BASE FRAME (5) to the REAR RIGHT VERTICAL FRAME (4) using two HEX BOLT M10X65 (41), four
WASHER10 (49) and two AIRCRAFT NUT M10 (48)
2. Attach the RIGHT VERTICAL BEAM (2) to the MAIN BASE FRAME (5) using two HEX BOLT M10X65 (41), four WASHER10
(49) and two AIRCRAFT NUT M10 (48)
3. Position the UPPER SIDE FRAME (6) on the top of the vertical frames. Attach through the bracket using a HEX BOLT
M10X55 (45), two WASHER10 (49) and an AIRCRAFT NUT M10 (48) on each side. Attach through the outer side bolt
holds at the top of the vertical frames using a HEX BOLT M10X20 (46) and a WASHER10 (49) on each side.
4. Attach the CHIN-UP BAR (22) using two CARRIAGE BOLT M10X40 (42), two WASHER10 (49), two AIRCRAFT NUT M10
(48) at each end.