Forbes ENHANCE UF+UV, Руководство пользователя

Страница: 10 / 20

Installing Your
Forbes Enhance UV
7
•
areas below freezing temperature.
• Connect it to only cold tap water. Filters can be damaged if connected to hot tap water.
2
Make sure that the tap water pressure and temperature is between 0.6-2.0 kg/cm and
o o
5 C - 45 C respectively.
• Make sure that the purifier is installed within the distance of 1.0 M from the tap water
supply. The purifier is for 230V only, so make sure that it is connected to 230 V power
outlets. Do not install the purifier in a place where water or rain could leak into the unit
(outdoors, etc.)
• Forbes Enhance UV can be kept on the kitchen counter or can be wall mounted using
a stand.
• In case the water pressure is higher than the maximum specified, use of pressure
reducing valve is recommended.
• Sequence to be followed for flushing:
(a) Remove the drain pug and snug fit the drain pipe (blue pipe) provided with the
installation kit. Keep the other end of the pipe in the drain.
(b) Turn On the diverter valve and switch On the unit. Let atleast 10 litres water to flush
and switch off the unit when the water becomes clear. Close the diverter valve. Put
back the end plug in its place (drain connector of the unit).
• Turn on the water supply and switch on the unit. Let the storage tank get completely
filled and then discard this first fill.
• Now, the unit is ready for regular use.
Install it in a dry, ventilated place, keeping it away from direct sunlight, heating devices or