Forbes Marshall CODEL EnergyTech 300 Series, Инструкция по установке, пусконаладке и эксплуатации

Страница: 9 / 72

www.codel.co.uk
Page: 9 © 2010 CODEL International Ltd.
CODEL
300
1 The EnergyTech 300 Series
The EnergyTech 301 and 302 are low-cost dust monitors using well-proven
technology providing accurate and rapid results.
Being adaptable it can can be used on duct sizes from 250mm to 5m making the
EnergyTech 301 a suitable sensor for a wide range of applications where a dust
measurement is required A low cost dust monitor using well-proven technology
providing accurate and rapid results. Being adaptable it can can be used on duct
sizes from 250mm to 5m making the EnergyTech 301 a suitable sensor for a wide
range of applications where a dust measurement is required
The EnergyTech 301 continuous dust monitor uses the well-proven tribo-electric
sensor technology to directly measure mass particulate concentration by sensing
the frictional charge created when particles collide with a conductor.
The advanced electronics of the EnergyTech 301 detect this signal and present it
to the operator via RS485 or 4-20mA directly out from the sensor head. The
EnergyTech 201 also features a built-in display for viewing live sensor data as well
as for configuration and calibration.
The measurement levels can be corrected to mg/m3 via an integrated calibration
function. The tribo-electric technique is extremely sensitive, capable of detecting
dust concentrations of less than 1mg/m3 in small ducts. The EnergyTech 301
requires no critical alignment and has no optical surfaces to keep clean. The sensor
is easy to install, requiring only a simple probe and is ideal for small duct sizes.
Minimal maintenance is required, infrequent probe cleaning and low installation
costs make this technology extremely attractive for dust collector monitoring.