30
BATTERY RECHARGE
Your meter comes with a built-in rechargeable Li-polymer battery. If
the low battery symbol
“
”
appears on the screen indicating that the
battery is low and it is time to recharge the battery.
1.
Connect the USB cable to the data port of the meter.
2.
Connect the other end of cable to a free USB port on your personal
computer.
3.
“
USb
”
will appear on the display and the charging indicator will light up
in red when battery is recharging. After the battery is fully charged, the
red light will turn green.
4.
Remove the USB cable and the meter will automatically switch off.
NOTE :
• It should take approximately 2 hours to be fully recharged. Recharging the
battery does not affect the test results stored in the memory.
• The USB cable is for battery recharging and data transmission with a
computer. If you wish to recharge through a wall outlet, please obtain a USB
adapter.
Содержание Test N'GO
Страница 79: ...NOTE NOTA...
Страница 80: ...NOTE NOTA...
Страница 82: ...Fora Care Inc 893 Patriot Dr Suite D Moorpark CA 93021 PLACE STAMP HERE COLOQUE ESTAMPILLA AQUI...
Страница 83: ......