A1-51
Data transmission via GPRS
(For FORA D40g only)
STEP 1
With the monitor turned off, press the
RF button
to initiate the data
transmission from the monitor. “PCL” will appear on the display and the RF
indicator will light up in blue. Then test results which have not been uploaded
will display on the screen and initiate the transmission in sequence of the
user’s number by GPRS service.
STEP 2
Follow the instructions provided in the software and insert the SIM card at the
bottom of the monitor battery compartment to transmit data (results that have
not been uploaded and their corresponding dates and times).
If the SIM card is not inserted, the “PCL” will start blinking, as the figure
showed below, and the monitor will turn off automatically after blinking for 30
seconds.
When the RF indicator is blinking in blue light, indicating the data transmission
has started. When the RF indicator shows yellow light, indicating the GPRS
service is online.
STEP 3
Press the
RF button
or the
On/Off
button and the monitor will turn off.
NOTE
If the monitor displayed a message like one on the right while
connecting to the server, please start over and try again. If
the problem still persists, please contact the place of
purchase for help.
51
