
EN-3
Screen Display
1. Measurement Unit
2. Blood Drop Symbol
3. Measuring Mode
4. Memory Symbol
5. Test Result
6. Face Low/High Symbol
7. Warning Symbol
8. Low Battery Symbol
9. Date/Time
10. Reminder Alarm
Getting Started
Initial Setup
Please follow the initial setup procedure before using the
device for the first time or after you have charged the battery.
When the battery power is extremely low and “
& ”
appears on the screen, the meter cannot be turned on.
Step 1: Enter the Setting Mode
Press
SET
. The display turns on.
Step 2: Configuring the Settings (Date, Time Format,
Time, Universal Tone, Memory Deletion and Reminder
Alarm)
Press
MAIN
repeatedly to adjust the value or enable/disable
the setting. Then press
SET
to confirm the setting and switch
to another field.
Note:
• You may setup Beep On, Universal Tone On and Beep Off by
press
MAIN
to change it.
• When Universal Tone is turned on, the meter guides you
through the blood glucose test using beep tones; it also
outputs the result as a series of beeps.