EN-18
Specifications
Memory
450 measurement results with
respective date and time
Dimensions
93 (L) x 26 (W) x 15.5 (H) mm
Power Source
3.7V
(Li-Polymer battery)
Weight
31.4g
External output
USB Cable (for DM30a) or
Bluetooth (for DM30b)
Features
Auto electrode insertion detection
Auto sample loading detection
Auto reaction time count-down
Auto switch-off after 2 minutes without
action
Temperature warning
Operating Condition 10°C to 40°C (50°F to 104°F), below 85%
R.H. (non-condensing)
Storage/
Transportation
Condition
-20°C to 60°C (-4°F to 140°F), below
95% R.H
Measurement Units
either mg/dL or mmol/L for glucose test
Measurement Range 20 to 600 mg/dL (1.1 to 33.3 mmol/L) for
glucose test
Hematocrit range
20~60% for glucose testing
Test Sample
Capillary whole blood
Test Result
Glucose measurements are reported as
plasma equivalents
This device has been tested to meet the electrical and safety
requirements of: IEC/EN 61010-1, IEC/EN 61010-2-101, EN
61326-1, IEC/EN 61326-2-6, EN 301 489-17, EN 300 328.
“Made for iPod”, “Made for iPhone” or “Made for iPad” means
that an electronic accessory has been designed to connect
specifically to iPod, iPhone or iPad, respectively, and it has
been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with
iPod, iPhone or iPad may affect wireless performance. iPod
touch®, iPhone® and iPad® are trademarks of Apple Inc.,
registered in the U.S. and other countries.
