EN
105
Switching on
1. Turn the rotary handlebar
1
45° backward and hold it.
1. Push and hold the safety
switch
8
.
Warning!
Observe the fol-
lowing work instructions.
Switching off
Release both handlebar
1
and
switch
8
to turn off the hedge
trimmer.
Note:
The motor stops operat-
ing if one of the switches is re-
leased.
Cutting techniques
Hold the hedge trimmer at an
angle of 5°–10° to the hedge.
Cut the hedge from bottom to
top, sides first.
3-position rotation
Push the release button
5
of the
rotary handlebar
1
and rotate
the handlebar to the desired di-
rection until it snaps in. Ensure
that the handlebar is engaged.
Continuous rotation
Push and hold the release but-
ton
5
. The handlebar rotates
continuously while holding the
release button
5
while working.
Cut the top in an oscillating
movement, advancing slowly.
1
2
1
1
2
Work instructions
Warning!
Check that all parts
are firmly attached and obvi-
ously undamaged.
Warning!
Hold the hedge
trimmer firmly with both
hands! Ensure that the cut-
ting bar does not touch any objects
or the ground and that there are no
people or animals in the vicinity
before starting! Risk of injury!
•
Look over the working area and re-
move any obstructions.
•
Remove all foreign objects from the
hedge, such as wire or other parts,
as these may block or damage the
cutting mechanism.
•
Cut out thick branches beforehand
using pruning shears.
•
Pick up the tool in both hands as
specified.
•
Always cut at full engine speed.
Содержание FQ-EHS 70070
Страница 102: ...EN 102...
