For-x XQ-48DSP, Руководство пользователя

Страница: 21 / 31

XQ-48DSPSpecial DSP amplifier
18
3. Software Operation
User Manual
3.3.5 Output signal equalizer and crossover operation
figure 3.3.10
PEQ button:
Click the "Parametric Equalizer" button to switch to the "Graphic Equalizer" mode.
The frequency, Q value and gain can be adjusted under the“Parameter EQ”interface;
only the gain adjustment can be made under the “Graphic Equalizer” interface, and
the frequency and Q value are not operational.
Reset EQ button:
It is used to restore the parameters of the 31-band equalizer to the original
pass-through mode (the frequency of the equalizer, the Q value and the gain are
restored to the initial value).
Restore All Equalizations button:
Switch between the currently designed equalizer state parameters and the
pass-through mode (the gain of all equalization points is restored to 0 dB, the
frequency and value are unchanged).
Reset Output Configuration button:
This button is to re-configure the output signal of the channel type of operation,
when clicked, will pop up prompt for users to choose. "Empty" is to get all the
output signal is not connected to any output channel speaker, of course, there will
be no signal output, in preparation for the user flexible configuration. "Default" is to
restore the initial system configuration, system configuration 4.1 sound field initial
full frequency mode. "Cancel" is to cancel the click operation.