For-x XQ-48DSP, Руководство пользователя

Страница: 20 / 31

XQ-48DSPSpecial DSP amplifier
17
3. Software Operation
User Manual
current channel change to not start moving (directly). Click the button that will
return to "restore the balance." Then click on "restore the balance" button will allow
all current equalizer channel back to the last activated state.
Note: This operation will change the equalizer gain.
Reset balanced: the button shown in Figure 3.3.4, click this button to make all
current channel equalizer parameters return to the initial state: uniform distribution
of frequency, Q value is 1.2, a gain of 0dB.
2. the output channel divider editing method
Figure 3.3.9
In the column of "frequency divider" in figure 3.3.9, the parameter value of the
device frequency divider.
Type setting: drop-down menu to select the way, there are (Linkwitz-Riley), (Bessel)
and (Butterworth) and other three options.
Frequency setting: via direct input value, scroll the mouse wheel up and down keys on
the keyboard and other ways to adjust low-cut or high-cut frequency. Adjustment
range: 20Hz ~ 20KHz.
Slope(slope)settings:6dB/Oct,12dB/Oct,18dB/Oct,24dB/Oct,30dB/Oct,36dB/Oct,
42dB/Oct, 48dB/Off/Oct and other 9 options.
Note: In 6dB / Oct, there is no type of algorithm, but a common type (displayed
as NULL).