
EN
140
EN
141
Technical Data
Noise & Vibration
The values given in these instructions
have been measured in accordance
with a standardized measurement
procedure specified in EN 60335 and
can be used to compare appliances.
It may be used for a preliminary as-
sessment of exposure.
Warning!
The vibration emis-
sion during actual use can
differ from the declared total value
depending on the use of the appli-
ance.
Troubleshooting
Caution!
Make sure the appliance is switched off and the battery is
removed. Always wear protective gloves.
Problem
Possible cause
Solution
Motor does
not run
Battery empty
Recharge battery
Unsuitable cutting areas
Start on short or already
mown grass.
Blade is blocked
Clean discharge chute and
housing (blade must rotate
freely)
Safety plug is not con-
nected
Connect safety plug
Battery is not correctly
inserted
Remove battery and insert
again
Wrong cutting height
Set the wheels to the correct
cutting height
Motor power
drops
Wrong cutting height
Set the wheels to the correct
cutting height
Discharge chute is
blocked
Clean discharge chute and
housing (blade must rotate
freely)
Poor and uneven cut
Replace the blade (contact
service center)
Collection
bag is not
filled suitably
Unsuitable cutting areas
Set the wheels to the correct
cutting height
Allow lawn to dry
Poor and uneven cut
Replace the blade (contact
service center)
Collection bag is full
Empty the collection bag
Discharge chute is
blocked
Clean discharge chute and
housing (blade must rotate
freely)
Type
FQ-ARM 4038 BASIC
Nominal voltage
40 V
Battery type and weight
FQ-LIO 4020 / 2,0 Ah / 0.9 kg
FQ-LIO 4040 / 4,0 Ah / 1.3 kg
FQ-LIO 4060 / 6,0 Ah / 1.7 kg
No-load speed n
0
4000/min
Cutting width
370 mm
Cutting height
25-75 mm
Grass bag capacity
40 litres
Weight (acc. to EPTA Prodedure
01/2003) without battery
15.5 kg
Sound pressure level L
pA
83.0 dB(A), Uncertainty: 3dB(A)
Sound power level L
wA
96 dB(A), Uncertainty: 3dB(A)
Vibration emission value a
h
2.0 m/s
2
, Uncertainty: 1.5 m/s
2