for Living 043-0749-8, Руководство по сборке

Страница: 22 / 72

Product No. 043-0749-8 / 043-0750-2
Troubleshooting Tips
22
Troubleshooting Tips
Problem Possible Causes Solution
Unit does not turn
on when pressing
ON/OFF button.
P1 Error Code.
E0 EEPROM error.
Contact the manufacturer or its service agents or a
similar qualified person for service.
In COOL mode: room
temperature is lower than
the set temperature.
Reset the temperature.
The water collection tray is full. Turn off the
unit, drain the water from the water collection
tray and restart the unit.
The air filter is blocked with
dust or animal hair.
The unit is low on
refrigerant.
Temperature setting is too
high.
The windows and doors in
the room are open.
The room area is too large.
Unit does not cool
well.
Exhaust hose is not
connected or is blocked.
There are heat sources
inside the room.
Turn off the unit and clean the filter according
to instructions.
Call a service technician to inspect
the unit and top off refrigerant.
Decrease the set temperature.
Make sure all windows and doors are closed.
Double-check the cooling area.
Turn off the unit, disconnect the hose, check for
blockage and reconnect the hose.
Remove the heat sources if possible.
The unit is noisy
and vibrates too
much.
The unit makes a
gurgling sound.
The ground is not level. Place the unit on a flat, level surface.
The air filter is blocked with
dust or animal hair.
Turn off the unit and clean the filter according
to instructions.
This sound is caused by the
flow of refrigerant inside
the unit.
This is normal.