FOR-A MFR-9SDIR, Руководство по эксплуатации

Страница: 6 / 14

6
2. [MFR-4000R] I/ O Card Installation / Replacement
IMPORTANT
Contact FOR-A agent or service center for I/O Card installation and replacement work since such
work should only be conducted by qualified technical personnel.
2-1. How to Install a New Card
The following procedure shows how to install an output card into OUTPUT1 slot.
1. Unfasten to remove four fixing screws along the front panel as shown and detach the front
panel.
2. Loosen the four thumbscrews and detach the
card stopper (Bottom) .
3. Loosen the two thumbscrews on the card stopper (Top) .
4. Loosen the three binding screws and detach the card stopper (Top) .
5. Detach the OUTPUT1 slot blank panel.
6. Insert a new card firmly into the OUTPUT1 slot.
* Confirm the slot number and
direction before card insertion.
Point the connector
upward.
(2)
(3)
Card stopper (Bottom)
OUTPUT1 slot
(2)
(2)
(2)
(3)
(4)
Card stopper (Top)
MFR
MFR-4000
ROUTING SWITCHER
R
POWER CPU1 CPU2
POWER 1 POWER 2
ON
OFF OFF
ON