12
3-2. How to Replace a Card
The following procedure shows how to replace a card in INPUT9 slot to a new input card.
1. Detach all the BNC cables connected to the
INPUT9 connector ports.
2. Unfasten to remove four fixing screws along the
front panel and detach the front panel.
3. Shutdown the INPUT9 slot in [SETTING > SLOT
SHUTDOWN] menu of Menu Display.
See MFR-6000R Operation Manual Sec. 4-2-2.
“Turning ON/OFF an Input/ Output Card” for details.
4. Remove the
card stoppers (A) and (B)
.
(See Sec. 3-1. “How to Install a New Card” for
details.)
5. Grab the INPUT9 slot card handle and slowly
remove (pull out) the card.
6. Insert a new card firmly into the INPUT9
slot.
*
Confirm the slot number (See page 3) and
direction before card insertion.
(See Step 5. in Sec. 3-1. “How to Install a
New Card.”)
7. Re-install the
card stoppers (A) and (B)
removed in Step 4.
(See Steps 6. to 8. in Sec. 3-1. “How to
Install a New Card.”)
8. Turn the INPUT9 slot
ON
using [SETTING
> SLOT SHUTDOWN] menu in Menu
display.
(See MFR-6000R Operation Manual Sec.
4-2-2. “Turning ON/OFF an Input/ Output
Card” for details.)
9. Verify that LEDs on the card installed into
INPUT9 light up.
10. Re-install the front panel.
The card replacement is now complete.
INPUT9 slot
INPUT9 slot
Card stopper (B)
Card stopper (A)
Содержание MFR-9SDIR
Страница 1: ...MFR 9SDIR MFR 9SDOR 1st Edition OPERATION MANUAL ...
Страница 13: ......
