1
2
4
3
5
6
8
9
10
11
12
13
14
15
16
7
7
8
GB
GB
User manual
Thank you for purchasing the Fontastic® wireless speaker „Casy“
incl. TWS headset. Please read the user manual carefully and
follow the safety instructions.
Package contents
• 2 x Casy wireless headset
• Multi-case (speaker | charging case | LED light)
• USB Type-C™ charging cable
• User Manual
Overview:
1.
Multi-function sensor
2.
Status LED
3.
Charging contacts
4.
Loudspeaker
5.
Loudspeaker
6.
Cover
7.
Status LED
8.
Multifunction button
9.
Volume-
10.
11.
Headset slots
12.
LED lamp
13.
Switch LED lamp
14.
Microphone
15.
Charging status indicator
16.
Type-C™ charging port
Charging the headsets
Insert the headsets into the slots of the multi-case. Close the case.
By closing it, the headsets get contact and are charged in the
automatically.
Charging the Multi-Case
Charge with cable: Connect the charging cable that came with
the case to the Type-C™ charging input of the case and a travel
charger or USB port of a computer to charge the built-in battery.
The charging status indicator on the multi-case shows the current
charge of the battery in 25%, 50%, 75% and 100% increments
respectively.
Wireless Charging:
Place the multi-case with the back centered
on a connected wireless charger. The LED will indicate that the
case is charging.
Headset Power On/Off
Automatic:
Remove both headset units from the multi-case, they will turn on
automatically.
Put the headsets into the multi-case and close it, the headsets will
turn off automatically.
Manual:
To turn on
the earbuds manually, press and hold the multi-function
sensor on either earbud for 4-5 seconds until the LED indicator
flashes blue.
To manually turn the unit off
, press and hold the multi-function
sensor on either earpiece for 4-5 seconds until the LED indicator
turns off.
Note: Both headsets automatically turn on and off when
removed from the case or inserted.
Multi-Case Power On/Off
To turn on the Multi-Etui wireless speaker, press and hold the
Multi-Etui multifunction button for approximately 2 seconds.
To turn off the Multi-Etui, press and hold the Multi-Etui‘s
multifunction button for approximately 2 seconds.
TWS connection of the headsets
Take both headset units out of the multi-case, they will switch on
automatically. The right headset is automatically connected to the
left headset.
Status LED (headset)
• One of the headsets does not light up, the other flashes red and
blue alternately: Pairing mode (TWS connected).
• Both headset units stop flashing: Connected to BT device or
switched off.
Pairing
The headset and multi-case must be connected to a Bluetooth
®
enabled device to be used wirelessly.
Pair headset:
1.
By removing both headset units from the multi-case, they
automatically turn on and enter pairing mode to connect to a
Bluetooth
®
source.
2.
Search for „
Casy
“ on your Bluetooth
®
enabled device and
select it from the list of found devices to pair the headset with
the Bluetooth
®
device.
