8
Water Treatment
With
Fontanella,
the water is filtered and delivered Still Ambient, Cold, Sparkling or Hot.
Caution:
Fontanella
is designed to use only drinkable water coming from municipal
water supply. The manufacturer declines any responsibility in case of non-drinkable
water or of water not controlled by the water authority. Any warranty will be deemed
void in this case.
The water treatment cycle is divided into three stages:
(1) Pre-Filtration
The inlet water goes through a fabric filter that retains deposits and rougher suspended
solids that could obstruct the second stage of the filtration system.
(2) Filtration
Water coming from the pre-filtration system goes through a composite filter that reduc-
es the bacterial count, eliminates suspended particles, chlorine and organic substanc-
es.
(3) Cooling / Heating / Carbonation
The treated water is then dispensed at either the same inlet temperature (still ambient
water), chilled (cold still water), the addition of CO2 (cold sparkling water), heated (hot
still water), or through the coffee dispenser (hot coffee).
OPERATION OF FONTANELLA
Power On
Plug in
Fontanella
to mains power inlet. Turn on the
Main On / Off Switch
at the back
of the Fontanella. Then switch on the unit with the
ON/OFF Button
located on the top
right of the unit. You will notice that the LED in the
Control Scroll
will light up
Blue
or
flash
RED
according to the symbol on which it is positioned.
Start Up is now complete. Wait at least 15 minutes for the
ICE Bank
to reach desired
cooling temperature. The
Fontanella
is now ready for use.
