CONNECTION
Switch off all the equipment and disconnect it from the mains before making any connections.
Connect the audio source to the frequency divider input (using the XLR input or the 6.3 mm stereo jack input),
normally it will be the signal from a mixer.
Adjust the filter parameters in accordance with the audio system characteristics.
In the following example you can see a 3-way stereo system plus subwoofer, although it is also possible to
just use the subwoofer output or set a 2-way system using only the bass and treble outputs and equalling
the bass-mid and mid-treble cut off frequency.
In a 3-way stereo system with subwoofer we will connect each frequency divider output to the corresponding
power amplifier and its respective loudspeakers. The subwoofer output will be connected to the sub-bass
amp (mono) that powers the subwoofer, the bass output to the bass amp (stereo), the mid output to the mid
amp (stereo) and the treble output to the treble amp (stereo). Each amp will power its corresponding
loudspeakers.
- 6 -
EN
