14.-
LOW CUT 30 Hz
: bass cutoff with a high pass filter 30 Hz cut off frequency and a slope of 12 dB/octave,
it is used to minimize problems caused by subsonic signals, to avoid noise and buzzing and to prevent
bass echoes in the loudspeakers.
15.-
SUB XOVER FREQ
: adjust the sub-bass low pass filter cut off frequency. The cut off frequency can be
selected from between 50 and 250 Hz. The filter slope is dB/octave.
BACK PANEL
1.-
INPUT
: audio source input, XLR and 6.3 mm jack connectors.
2.-
HIGH:
treble output, XLR.
3.-
MID:
mid output, XLR.
4.-
LOW:
bass output, XLR.
5.-
WOOFER:
balanced subwoofer output, XLR.
6.- Power supply fuse holder. If the fuse blows, check possible causes and replace it for one with the same
characterisitcs.
7.- AC power supply connector.
- 5 -
EN
