FONESTAR TMRI-844, Инструкция по эксплуатации

Страница: 6 / 16

EN
- 6 -
MSHT-45P Tie-clip microphone with wireless belt-pack transmitter
1.- Display : displays information on the tuned frequency, channel number, battery level, RF signal level
and audio signal level. If the battery level is low, the screen will light up red.
2.- w / s : allows selection of required optionsin order to configure the wireless belt-pack microphone.
3.- SET : allows selection among the different configuration options: channel number and frequency, RF
transmission level (high/low), battery type selection (1.2 V - rechargeable/1.5 V - alkaline) to display the
battery level correctly and lock the receiver. In order to do so, press the SET button repeatedly and use
the
w
/
s
buttons to select the options.
4.- Battery compartment : use two 1.5 V LR6-AA batteries, alkaline or rechargeable. When inserting the
batteries, make sure the polarity is correct.
5.- Antenna.
6.- VOL : wireless belt-pack transmitter volume control.
7.- 3.5 mm mono jack connector for connection of microphone or required audio source.
8.- POWER : transmitter on/off switch.
9.- LINE/MIC : input signal sensitivity selector.
10.- Contacts to recharge the wireless microphone’s rechargeable batteries in the recharge docking station
mod. MSC-2 .
Note : when the SET button is pressed to configure the different parameters of the microphone, a MUTE
indicator appears in the display and the microphone will not receive audio while the parameters are
being configured
TMRI-844_TPRI-845, TSRI-841_MANUAL_(EN)_20180315_Maquetación 1 15/3/18 12:31 Página 6