EN
- 6 -
Two speaker zones
In this application, two amplifiers in low impedance mono bridge mode are used together with the TFA-500 to
get 2 independent 100 or 70 V lines.
Place the STEREO/BRIDGE MONO selector in the STEREO position.
Connect the mono output channel from each low impedance amplifier to the INPUT 1 and INPUT 2 inputs.
Connect the speaker line to the speaker output. Use the 100 or 70 V line output in accordance with the type of
speakers that you are going to connect. Only use one of the output lines.
All the speakers must be connected in parallel and the sum of the power of all the speakers must not exceed
the power supplied by the
TFA-500
.
