EN
- 5 -
CONNECTION
Note:
to avoid damage, the power of the input signals connected to INPUT 1 and INPUT 2 must not
exceed the power supported: 500 W RMS per channel in stereo mode or 1000 W RMS in mono bridge
mode.
Stereo mode
In this application, a low impedance stereo amplifier is used together with the TF-500 to get two 100 or 70
V lines.
Place the STEREO/BRIDGE MONO selector in the STEREO position.
Connect both of the low impedance amplifier stereo output channels to INPUT 1 or INPUT 2.
Connect the speaker line to the speaker output. Use the 100 or 70 V line output in accordance with the type
of speakers you are going to connect. Use only one of the output lines.
All the speakers must be connected in parallel and the sum of the power of all the speakers must not exceed
the power supplied by the
TFA-500.
