11.-
RING
: microswitches which allow the number of call tones to be selected before the device is picked
up automatically
Pick up
Pick up
Pick up
Pick up
automatically
automatically
automatically
automatically
after first tone
after second tone
after third tone
after fourth tone
Note
: if the microswitches are in any other position than these four, the device will not allow manual or
automatic pick up
12.-
OUTPUT
: aux line output, to connect an amplifier or mixer, 2 x RCA connectors.
13.- AC socket. For AC power supply cable connection.
14.- General on/off switch.
CONNECTION
- Make the connections with the device and all the components of the audio system switched off and
disconnected from the power supply.
- Connect the telephone line in the LINE input.
- Connect the output OUTPUT to the amplifieror mixer that you wish to use.
- Adjust the number of ringtones before the device picks up automatically using the microswitches RING
located on the rear panel of the device.
- Once the connections have been made according to your needs, connect the devices to the power supply
and switch them on. After use, do not forget to switch off and disconnect the device from the power
supply.
- 5 -
EN
160309_TF-1601_MANUAL_(EN)_Maquetación 1 9/3/16 15:23 Página 5
