- 4 -
DESCRIPTION
- Telephone switchboard adapter for PA systems.
- Automatic or manual pick up and line closure.
- Contact closure output during call.
- Loudspeaker monitor incorporated.
- Contact closure switch on.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.-
LED device power indicator.
2.-
POWER
: device on/off switch.
3.-
Information display. Only allows device volume to be seen.
4.-
The telephone switchboard adapter operates automatically or manually with this button. Pick up
automatically in the selected ringtone with the RING microswitches located in the rear panel of the
device and hang up if the other interlocutor ends the call. It is recommended to use a telephone
connected in parallel with a T adapter to hear the incoming call. In this case, the telephone can be
picked up with the telephone and with the button and hung up manually with this button.
5.-
VOL
: device general volume controls.
6.-
MONITOR:
internal loudspeaker volume control.
REAR PANEL
7.-
REMOTE POWER
: by shortcircuiting these terminals, the device will switch on whenever the general
switch in the rear panel is switched on.
8.-
ACTIVE OUT:
screw terminals that are in open circuit while there is no incoming call and they are
shortcircuited when the incoming call is picked up.
9.-
BUSY TONE
: allows adjustment of the device so that it correctly detects the call hang up tone.
10.-
LINE
: inputs to connect the telephone line, RJ-11 connectors.
EN
160309_TF-1601_MANUAL_(EN)_Maquetación 1 9/3/16 15:23 Página 4
