INPUT CHANNELS CH 7-CH 8
9.-
EQ
: 3-band equalizer per channel. Treble, mid and bass tones controls with
a gain of ±15 dB.
HIGH
: high pass filter with 12 kHz cut-off frequency.
MID
: band pass filter with 2.5 kHz central frequency.
LOW
: low pass filter with 80 Hz cut-off frequency.
10.-
MON
: allows control of the signal level which is sent to bus MONITOR.
11.-
EFX
: allows control of the signal level which is sent to effects bus.
12.-
LEVEL
: volume control of the channel input signal which is sent to the bus
MAIN.
13.-
LINE
: unbalanced line level stereo input, 2 x 6.3 mm jack connectors.
14.-
MIC
: balanced mic. level input, XLR connector. Allows the connection of
condenser microphones which require phantom power supply. In order
to do so, the phantom power 48 V should be activated with the
corresponding selector.
15.- Selected effect visualisation display.
16.- Knob which allows selection of one of the 16 available effects.
17.- LED indicator which lights up red when the phantom power supply is
activated.
18.- Phantom power supply se48 V to provide power to the condenser
microphones. The phantom power supply is activated in channels CH1 to
CH8 at the same time.
19.-
EFX OUT
: volume control of the signal sent to the EFX OUT output.
20.- 7-band graphic equalizer for the outputs MONITOR
and MAIN.
21.- MONITOR LED output signal level indicators and MAIN.
22.- General volume control of the output MONITOR.
23.- General volume control of the output MAIN.
24.-
FX
: general volume control of the effects bus which
is sent to the outputs MONITOR and MAIN.
25.-
AUX IN
: general volume control of the input AUX
INPUT which is sent to the outputs MONITOR and
MAIN.
26.-
TAPE IN
: general volume control of the input TAPE
IN which is sent to the outputs MONITOR and MAIN.
27.- General volume control of the USB/SD/MP3 player which is sent to the outputs MONITOR and MAIN.
- 5 -
EN
160205_SMA-208RUB_MANUAL_(EN)_Maquetación 1 5/2/16 13:53 Página 5
